Beer Crowler vs Growler: Differences in Size, Longevity & Usage

Beer Crowler vs Growler: Differences in Size, Longevity & Usage

In the beer world, there are many different terms that may seem confusing at first glance including crowler vs growler. Understanding the different types of beer is only the first step.

There are also other secondary terms to know if you want to understand the nuances of this beverage. The two most important subcategories related to beer are crowler vs growler, which are both ways to store and transport beer.

Crowlers and growlers refer to two different kinds of containers that you can take home from a brewery or bar after drinking their draft beer. Both crowlers and growlers are popular vessel types for transporting and storing draft beer. But what’s the difference between crowler vs growler? Let’s take a closer look at these two options for taking home your favorite draft beers.

What is a Crowler?

Crowlers are a relatively new phenomenon that is quickly taking the beer world by storm. Crowlers are pre-sealed aluminum containers, about 64oz in size. They can be filled with any draft beer and then sealed up for an airtight, clean seal.

They’re commonly referred to as “canning” beers because of the resealable cans that they come in. Compared to growlers, crowlers are more durable and don’t need to be carried around by opening a tab.

That means they’re perfect for when you want to take home some cold beer without it spilling or getting damaged on the way home. What’s the main difference between a crowler and growler? Crowlers offer more convenience compared to growlers because you don’t have to handle them as much when transporting them home.

You can just toss it in your bag or bring it with you without worrying about leakage or spilling. Growlers only come in glass bottles, which means they’re easier to break, especially if you put them down hard on a surface like concrete or stone.

Plus, growlers need to be opened outside of your car if you’re going somewhere else, whereas you can easily drink from a crowler on your way there and back again.

What is a Crowler vs Growler?

How many beers are in a crowler?

Crowlers contain about 32 oz. of beer. The beer transportation device thus contain about 2 full pints of your favorite beer.

A crowler is different from a growler because it’s aluminum and completely recyclable. Growlers are typically made of glass or plastic, which can’t be recycled but can be reused.

What is a Growler?

Growlers are a popular vessel for transporting beer to go. They are often seen as the “traditional” way to take your draft beer home.

Growlers are glass or metal containers that can be filled with your favorite beers. Most growlers are 64 ounces, and they typically come with a screw top lid so you can drink from them as soon as you get home.

Growlers were originally developed in the 1800s to transport beer on horseback. They were used by locals who wanted to bring their local brewery’s beer to social events in the countryside.

Today, not much has changed since this container is still widely associated with taking home beer from the brewery itself. Growlers provide an interesting twist on traditional packaging because they allow customers to see how much of their favorite beer is left before re-upping at the bar or brewery.

How many beers are in a growler?

The size of a growler is 64 ounces, which is equal to 4 pints (or just over 5 12oz servings). So, you can count on getting about 5 beers in a growler. Growlers are typically sold at breweries or bars that serve draft beer.

They are sometimes available at liquor stores as well. You can find them in different sizes, with 64 ounces being the most common size for purchase. If you’re looking for an easy way to transport your favorite beer home from the store or brewery, a growler is the best option for you.

It’s also great because it comes in many different sizes and will keep your beer fresh much longer than other storage methods.

Benefits of Crowlers and Growlers

Crowler for beer transportation

Crowlers and growlers both offer benefits for those who enjoy drinking draft beer and want to take it home with them. Crowlers come in a 32-ounce container, which is the equivalent of two 16-ounce cans of beer.

Growlers are more traditional containers—they come in 32 ounces or 64 ounces, but they’re usually made of glass. Crowlers are preferred by breweries because they don’t need to worry about returning their empty cans or bottles—they can just recycle them. They also have less lead time than growler production.

How to Store Beer in Crowlers and Growlers?

Both crowlers and growlers are perfect for storing draft beer. Crowlers are also known as aluminum growlers. They’re made of two 3-inch pieces of metal that are sealed to create a single canister.

This canister is then filled with fresh draft beer. The benefit of crowlers is they keep the beer fresh up to two weeks longer than a regular growler.

Growlers are glass or plastic containers that are used to store draft beer in either 64 or 32-ounce sizes. Because growlers are made from a more fragile material, some people prefer crowlers because they will keep the beer fresher for longer periods of time and have less risk of breakage.

Crowler vs Growler: The Differences

Crowlers and growlers are both containers you can take home after drinking draft beer at a brewery or bar. But what’s the difference between crowler vs growler? There are a few key differences to keep in mind when choosing which of these vessels to buy for your beer consumption.

  • Growler: A growler is a glass container that holds 64 ounces of beer. Growlers are typically sold with two caps, one of which is pressurized and remains on the container until it’s opened. This helps maintain carbonation, flavor, and freshness while also preserving the life span of the beer. Growlers can be sealed as soon as they’re filled and will remain good for up to two weeks if stored properly.
  • Crowling: A crowler is a 32-ounce aluminum can that is filled with draft beer by pressing down on the top of the can. It’s then capped off with an aluminum cap and labeled. Crowlers provide many benefits over traditional growlers including increased portability, increased sustainability, ease of use (no need for any pouring), and decreased cost per ounce compared to buying from a tap in most cases (in states where taxes on alcohol are low). The downside is that you cannot reseal them so any leftover beer will need to be drunk immediately or thrown away.

When to Use a Crowler and When to Use a Growler

A crowler is a 32-ounce can that can be filled with draft beer from a tap at a brewery. They are sealed on site, which means you don’t need to worry about the beer going flat or spilling when you get home.

The key benefit of using a crowler is that the beer tastes fresher than if it were in an open growler. Growlers are containers that hold 64 ounces of beer, which is a perfect size for sharing.

Growlers are usually made out of glass and they come with either airtight screw tops or cork and cage closures. Growlers also do not need to be consumed right away as they are sealed bottles, so they will keep the beer fresh until opened.

Which beer is served in a Crowler or Growler?

Crowlers and growlers are the same size but growler may have different sizes. They measure in at 64 ounces, which is equal to a half gallon. That’s a lot of beer! In terms of what beer is served in these containers, both growlers and crowlers typically serve draft beers that come from taps.

However, crowler vs growler have some key differences between them. The first difference between the two is that a crowler can be sealed and stored upright, unlike growlers, which need to be stored on their side to avoid spilling.

Another difference is that crowlers are made out of aluminum for better preservation qualities than glass growlers. The main difference between crowler vs growler has to do with how they are used after purchase: With a crowler, you can buy draft beer from the brewery or bar where it was served and take it home in one container.

Growlers require you to remove the lid after consumption so that you can drink from it again later on without risking spilling all over your car or home.

Crowlers make it easy for drinkers because just flip over your empty container when you’re done drinking and seal it up right there at the tap!

Can you reseal a Crowler?

Can you reseal a Crowler?

The main difference between a crowler and a growler is that you can reseal the beer in a crowler. This is not the case for a growler. Crowlers are also made of aluminum, which means they are lighter than glass growlers.

Crowlers come in 32oz, 64oz, or 128oz sizes, but you can’t bring them home from breweries or bars to drink later like you can with growlers. The cans used to make crowlers can be recycled while the glass used for growlers cannot.

Growlers are heavier and more fragile than crowlers, so they may not be as convenient when traveling on foot or carrying with two hands.

Growlgwater vs Crowler: Which One Should I Choose? If you don’t mind spending more money upfront and weighing a little bit more while carrying your beverage, then you might want to consider investing in an aluminum crowler instead of a growler container. If you plan on drinking your draft beers right away, then get a growler!

Final Words

Both crowlers and growlers are popular vessel types for transporting and storing draft beer. But what’s the difference between crowler vs growler? Crowlers are created from a machine that has a quick reaction time with minimal oxygen exposure, so they can retain the flavor of the beer.

Crowlers are carried away in special aluminum cans that seal shut at the top. These cans also eliminate any light exposure, so you get a better tasting beer.

Growlers have been around for quite some time, but there is always room for improvement. Crowlers have been on the rise recently because they offer more benefits than traditional growlers, like preserving taste and eliminating light exposure.

In other words, it doesn’t matter if you prefer to drink canned or bottled beers; both crowler vs growler options offer something different in terms of their benefits. If you want to know more about how these two vessels work, refer to our ultimate guide above!

FAQs

What’s the difference between a crowler and growler?

A crowler is a can that is filled to-go from the tap, whereas a growler is a container that you fill with beer at the tap. Crowlers are popular because they’re more durable than glass bottles and they don’t require any special equipment to fill them.

Which one of crowler or growler should I use?

Both are great options for bringing home your favorite draft beers, but there are some factors to consider when deciding which one to use. A growler can be used over and over again, so it’s an excellent option if you plan on drinking more than one bottle. For example, if you live with roommates, getting crowlers may not be cost-efficient because they need to be thrown away after each use.

How much does a crowler or growler cost?

Some breweries will charge significantly less for filling up a growler versus filling up a crowler. This is because the process of filling up the growler only takes seconds whereas the crowler will take several minutes. Therefore, pricing will vary depending on what brewery you visit to fill your growlers or get your crowlers filled up.

Leave a Reply

Your email address will not be published.